Operation Manual

Chapter 2: Pre-production
51
2. The Scene Detection window opens.
3. Increase or decrease scene detection sensitivity, if necessary.
Increased or decreased scene detection sensitivity yields an
increased or decreased number of scenes that are detected. You
may do this in one of the following ways:
• Drag the Sensitivity slider.
• Click the or buttons.
4. Click Settings and set your scene detection options, if necessary:
• The Detection method section pertains to video clips that
have been captured. (If the video clip was not captured, the
Detection Method options are disabled.) If you have a DV
AVI clip that contains multiple time codes (i.e.: time codes
are automatically set when you start and stop recording)
and you wish to split up your clip in this manner, select
Detect by changing of timecodes. Otherwise, use Detect
by changing of video frames.
5. Locate the position where you would like to begin detecting
scenes. You may do this in one of the following ways:
• Use the playback buttons.