Operation Manual

CyberLink PowerDVD
36
If you did not set up your 3D display device at first launch, you can do so at any
time in the 3D Display Configuration window. See "3D Display Configuration" on
page 36 for more information.
Note: a number of features are disabled during 3D playback. See the readme for a
detailed list.
Enabling 3D Playback
When you insert a 3D Blu-ray Disc or DVD, or play a 3D video file, CyberLink
PowerDVD plays it back automatically in 3D if 3D mode is enabled. CyberLink
PowerDVD also automatically converts all 2D DVDs and video files to 3D using
TrueTheater 3D once 3D mode is enabled.
To enable 3D playback, just select the button on the playback controls.
Note: 3D mode is enabled when the 3D icon on the playback controls displays as .
If you need to adjust your 3D display configuration or the playback settings, click
next to the button on the playback controls. See 3D Display Configuration
for details on all the available configuration options.
3D Display Configuration
To open the 3D Display Configuration window, click next to the button on
the playback controls. Configure the 3D settings as follows:
General
On the General tab, set the 3D display configuration.
• 3D scene depth: if required, use the slider to adjust the amount of depth in the
video image, until the resulting 3D image is optimized for your specific setup.
• Swapping left/right eye views: during the playback of 3D content, if you
begin to feel uncomfortable or uneasy, it may be because the layout of the 3D
video is displayed differently than most standard content. If this occurs, try