Operation Manual

CyberLink PowerDVD

Note: some of these options are only available during playback.

Smart De-Interlacing Mode

This configuration allows for modifications according to display screen

preferences.

De-Interlacing mode

• Select None if you don’t wish to use de-interlacing.

• Select Perform de-interlacing if you want to lower your CPU usage.

Note: if TrueTheater video effects are enabled, the below de-interlacing options are

disabled.

•

If enabled, select the De-interlacing method from the drop-down list.

Advanced users should select the option that best suit their needs.

• If enabled, it is recommend that you use Perform smart de-interlacing and

the recommended setting is Advanced pixel adaptive. This optimizes the

video quality.

Dual Display Mode (Using Overlay and Clone

Mode)

The Dual Display Mode settings enable you to display video on two display

devices (such as a computer monitor and a TV). Available options depend on the

video graphics card in your computer.

• Default driver setting: select this to use the driver default overlay behavior,

which is normally to show black video on the secondary monitor.

• Full screen on secondary device (using Overlay mode): select this to use

Overlay mode to display full-screen video output on your secondary display

device.

• Same-on-all (using Off-screen mode): select this to use Off-screen mode to

display the same video output on both your primary and secondary display

devices.

• Don't change (use current VGA driver settings): select this option to use the

current setting for the VGA driver, which can be changed via the control panel.