Operation Manual

Chapter 4: Settings
87
the video’s position. Experiment with the sliders until you find a custom
stretch that fits your specific display device.
Preferred display device
Select which of your display devices, if you have more than one, you would like use
as your default for viewing movies.
• Secondary device: this option is only available in clone mode. If you selected
Secondary device as your preferred device, select its aspect ratio to specify
the screen’s resolution. If the device is neither 4:3 or 16:9, select Other and then
select another aspect ratio from the drop-down menu.
Note: when in clone mode, the resolution of both monitors is the same. However, if the
selected preferred monitor is 4:3 and the other monitor is 16:9, the video on the 16:9
monitor will be distorted. Therefore, the preferred device should be set to secondary
and the aspect ratio set to 16:9. The video on the 4:3 monitor will be distorted, but the
video on 16:9 monitor will be correct.
DVD Settings
On the DVD tab, you can configure the settings for the playback of DVD titles.
DVD features
The DVD features option lets you configure some special settings when playing
DVDs or VCDs.
Note: you can only configure these options when playback is paused.
•
Automatically enable Read-It-Clearly in full screen mode: select this option
to have CyberLink PowerDVD dynamically reposition subtitles when played at
full screen, obstructing less of the video.
- High performance mode: select this option for improved performance
when Read-It-Clearly is enabled.
Note: it is recommended that you upgrade to the latest version of VGA drivers, if
applicable, before enabling High performance mode.