Operation Manual
CyberLink PowerDVD
84
• For the De-Interlacing Mode section, We recommend that you
use Perform smart de-interlacing and the recommended
setting is Auto-select. The Auto-select mode will optimize the
video quality by selecting a deinterlacing mode.
• To select a de-interlacing mode yourself, check the Specify
Manually option, then select your De-Interlacing Method and
De-Interlacing Algorithm. Advanced users should select the
option that suits their needs best.
Dual Display Mode (Using overlay and clone
mode)
The Dual Display Mode settings enable you to display video on two
display devices (such as a computer monitor and a TV). Available
options depend on your video display card.
Note: Dual Display Mode is currently not available under Windows Vista.
• Default driver setting: select this to use the driver default
overlay behavior, which is normally to show black video on the
secondary monitor.
• Full screen on secondary device (using Overlay mode): select
this to use Overlay mode to display full-screen video output on
your secondary display device.
• Same-on-all (using Off-screen mode): select this to use Off-
screen mode to display the same video output on both your
primary and secondary display devices.
• Don't change (use current VGA driver settings): select this
option to use the current setting for the VGA driver, which can be
changed via the control panel.
Color
The Color tab lets you manually configure the color scheme for your
video. You may adjust the pre-set color schemes or create your own
color profile.
Color control