Operation Manual

Produce a Movie Disc
21
Capture from a VCR
You can capture video (including the audio portion) from a VCR for
use in PowerProducer by clicking the VCR option.
To capture from a VCR, do this:
1. Select a video source. The options Composite and S-Video refer
to different types of analog video. Select the option that matches
your VCR.
Note: If you are unsure which kind of VCR you have, check the
type of connector you attached it with: this connector
should be labeled as composite or s-video.
2. Select an audio source from the drop-down box. This source
reflects the input source of your audio card.
3. Click to begin capture.
•
You may enter a duration (in minutes and seconds) in the
Auto-recording duration field to instruct PowerProducer to
capture this amount of video from the time you begin
recording.