Operation Manual

CyberLink PowerProducer

Note: Make sure that your DV or HDV camcorder is turned on and set to VCR

mode in order for it to be detected by CyberLink PowerProducer.

3. Locate the content you want to capture, in one of the following

ways:

• when capturing from an HDV or DV camcorder, you can use the

playback controls under the Preview window.

• when capturing from a TV, use the buttons to select the channel

you want to capture video from.

4. If required, select Auto-recording duration and then enter the

length of the video you want CyberLink PowerProducer to capture.

5. Click to begin capture.

6. Click to end the capture when you have captured the video you

want. If you selected Auto-recording duration, CyberLink

PowerProducer will stop capturing automatically once the

duration has been reached.

Note: Non-realtime capture continues capturing and processing after the

video has finished playing in order to ensure that no frames are dropped

during capture.

Capturing Photos from a Removable

Device

You can capture photos from a removable device, such as a digital

camera or other USB device, for use in CyberLink PowerProducer by

selecting the Photos option.

To capture from a removable device, do this: