Operation Manual

CyberLink PowerProducer
38
3. Click Burn. The task begins immediately. CyberLink
PowerProducer displays the real-time progress.
Note: The burning process may take at least a few minutes, depending on
the length and quality of your video and your computer’s processing power.
Be prepared for a short wait while CyberLink PowerProducer renders your
production.
When the task is completed a window appears displaying a
congratulatory message and offering several options to continue.
•Click Play Disc to play the disc in CyberLink PowerDVD, if it’s
installed on your computer.
•Click Go to Main Window to return to the main CyberLink
PowerProducer window.
•Click Quit PowerProducer to close the program.
Save Your Production as a Disc
Image
You can save your production on your hard drive as a disc image for
later burning. This option is particularly useful if your computer
currently does not have a disc burning drive installed.
To save your production as a disc image, do this:
1. Check the Save as disc image option.
2. Click , select the directory where you want to save the disc
image and then enter a file name.
3. If you are using a NVIDIA graphics card that supports CUDA
technology or an ATI graphics card that supports Stream
technology, select Enable GPU hardware video encoder to help
speed up the overall production time.
4. Click Burn. The task begins immediately. CyberLink
PowerProducer displays the real-time progress.
When the task is completed a window appears displaying a
congratulatory message and offering several options to continue.