Operation Manual

Chapter 3: Right-to-Disc

5. Select the target disc format from the drop-down and then click

Next.

6. From the Recording from drop-down list, select the source you

want to record from.

Note: Make sure that your DV or HDV camcorder is turned on and set to VCR/

Camera mode in order for it to be detected by CyberLink PowerProducer.

7. If required, click to configure your device.

8. If required, set the configuration items.

9. If required, click on the Settings tab to display and set the disc and

video settings.

Note: Click the on the Settings tab to make a custom menu for your

disc. See "Creating Disc Menus" on page 28 for more information.

10. Click Record to begin burning. CyberLink PowerProducer displays

the real-time progress of the task.

Note: The burning process may take at least a few minutes, depending on

the length of your video.