Operation Manual

Chapter 4: Studio Mode
107
Capture Video in the Compose window
You can capture video from a variety of sources.
To capture video in the Compose window, do this:
1. Create or open a Studio presentation project.
2. Click .
3. Click . The Device Configuration dialog box opens.
4. Uncheck the Audio only option.
5. Modify your capture configuration if necessary, then click OK. For more information, see
"Configure Your Capture Devices" on page 37.
Note: Make sure that your capture device is connected, turned on, and ready to record.
6. Click to begin recording.
• To modify the recording volume, click (next to the Record button), then drag the slider
up to increase recording volume or down to decrease recording volume. Click to mute
the recording volume. Click to unmute the recording volume.
7. Click to stop recording.