Operation Manual

Chapter 4: Studio Mode
109
Capture Audio from a Capture Device in the Compose window
To capture audio from a capture device in the Compose window, do this:
1. Create or open a Studio presentation project.
2. Click .
3. Click . The Device Configuration dialog box opens.
Note: Make sure that your capture device is connected, turned on, and ready to record.
4. Check the Audio only option.
5. Modify your capture configuration if necessary, then click OK. For more information, see
"Configure Your Capture Devices" on page 37.
6. Click to begin recording.
• To modify the recording volume, click , then drag the slider up to increase recording
volume or down to decrease recording volume. Click to mute the recording volume.
Click to unmute the recording volume.
7. Play your audio source.
8. Click to stop recording.