Operation Manual

Chapter 3: Full-Screen Presentation mode
37
Configure Your Capture Devices
Before capturing, you may wish to configure your capture devices. Normally, you should not
need to modify the default device configuration.
To configure your capture devices, do this:
1. Create or open a Full-Screen Presentation project.
2. Click the Presentation tab.
3. Click . The Device Configuration dialog box opens.
4. Configure your devices as necessary:
• Video: Select your video capture device from the Video Capture Device drop-down
menu. Select the source of video input from among the available Video Source options.
(Available options vary from computer to computer.) Select a video option from the
Video Option drop-down menu.
• Audio: Check Audio only at the top of the dialog box to record audio without video.
Select your audio capture device from the Audio Capture Device drop-down menu.
Select the source of audio input from among the available Audio Source options.
(Available options vary from computer to computer.) Select an audio option from the
Audio Option drop-down menu.
5. Click OK.
Record Video in the Presentation Window
To record a full-screen presentation, do this:
1. Create or open a Full-Screen Presentation project.
2. Click . A message box opens, reminding you to click the Record icon in order to begin
recording. Click OK to enter recording mode. (To prevent this message box from opening in
the future, check the Do not display this message again option before clicking OK.)