Instruction manual

86 Operating the Web Control Panel
Cybernetics UM-MV-86-B1-0801
for backup” is selected by default if you choose “Erase VT” or if the virtual tape is
already blank, but you can deselect it if desired
You can clear the association between a physical tape and the virtual tape for off-
loading from the “Physical tapes” tab (See “Physical Tapes Tab” on page 97
• Offload disk to tapes...
This option creates jobs that do the actual work of copying the virtual tapes to
physical tapes.
(See “Jobs Tab” on page 99) for more information on Jobs.
Selecting “Offload disk to tapes...” will show the “Offload disk to tapes” window
with its two tabs: “Copy selections” and “Copy options”.
Figure 3-37 “Wait for backup” Option
Figure 3-38 “Clear VT for offloading” Option
Note
“Offload disk to tapes...” creates a new set of jobs each time you use it.
If you had suspended an offload job and you want to resume that job
instead, you can do so from the “Jobs” tab.