Instruction manual

Operating the Web Control Panel 97
UM-MV-86-B1-0801 Cybernetics
number (0-65535). The OK button sets and the Clear button erases the volume
tag. Be sure not to assign the same volume tag to more than one virtual tape.
• Properties: Brings up a properties box listing the following virtual tape information:
“Name” (tape label), “Location” (disk number the VT resides on), “Writable”
(whether it’s currently write-protected), “Volume tag” (ID text and sequence
number), “Capacity” (bytes), “Used space” (bytes), “Free space” (bytes), “Up-to-
date copies” (number of copies committed to physical tape cartridge) and “Last
modified” (month, day, year and time of last update; see “Set Date/Time”) (See
Figure 3-55).
Physical Tapes Tab
The “Physical tapes” tab shows the current status of tape cartridges in a physical
library. The HSTC remembers the contents for physical tapes containing copies of vir-
tual tapes, displaying the status information on the “Physical tapes” tab. The tab
shows the “Contents” of the tape cartridges and whether the contents are identical to
Figure 3-54 “Edit” Tab for Volume Tags
Figure 3-55 Virtual Tape Properties Windows
Note
This section only applies if the miSAN-V-Series is configured with Tape
Library Control support, and is configured to operate an external tape
library.