Operating instructions
4
3. The Connected Equipment Guarantee does not cover damage to Connected Equipment or apply if the Product
has been operated in a failure mode or not in compliance with CyberPower operating instructions and manuals, or
if the Connected Equipment has been operated in a failure mode or not in compliance with the instructions and
manuals of its manufacturer/vendor.
The Limited Warranty and the Connected Equipment Guarantee Do Not Apply Unless The
Initial Customer:
1. Has properly connected the Product and the Connected Equipment to properly wired and grounded outlets
(including compliance with electrical and safety codes of the most current electrical code (ANS/NFPA 70), without
the use of any adapters, extension cords of other connectors.
2. Has provided a suitable and proper environment for use and installation of the Product and Connected
Equipment.
3. Has properly installed and operated the CyberPower Product and Connected equipment.
4. Has operated the Product at all times within the limitations on the Product’s VA capacity as stated in this User
Manual.
CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the Following:
1. Loss of or damage to data, records, or software or the restoration of data or records, or the reinstallation of
software.
2. Damage from causes other than AC Power Line Transients, spikes, or surges on properly installed, grounded
and code-compliant 120 volt power lines in the United States and Canada; transients, surges or spikes on
standard telephone land lines, PBX telephone equipment lines or Base 10T Ethernet lines, when properly
installed and connected. (This exclusion applies, for example, to fluctuations in data transmission or reception, by
CATV or RF transmission or fluctuations, or by transients in such transmission.
3. Damage from any circumstance described as excluded above with respect to the product.
4. Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, or abuse, misuse, or
alteration of either the product or the Connected Equipment.
Exclusion of Consequential and Other Damages.
The sole and exclusive remedies of the Initial Customer are those provided by the Limited Warranty and Connected
Equipment Guarantee. CyberPower excludes any liability for personal injury under the Limited Warranty and
Connected Equipment Guarantee. CyberPower excludes any liability for direct, indirect, special, incidental or
consequential damages, whether for damage to or loss of property [EXCEPT FOR (AND ONLY FOR) the specific
limited agreement of CYBERPOWER to provide certain warranty benefits regarding "Connected Equipment" under the
"CYBERPOWER Connected Equipment Guarantee"], loss of profits, business interruption, or loss of information or
data. NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation may not apply to you.
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK
ACTIVITIES.
CyberPower does not sell the Product for use in high-risk activities. The Product is not designed or intended for use in
hazardous environments requiring fail-safe performance, including the operation of nuclear facilities, aircraft navigation
or communication systems, air traffic control, weapons systems, life support or medical applications or for use in any
circumstance in which the failure of the Product could lead directly to death, personal injury, or severe physical or
property damage, or that would affect operation or safety of any medical or life support device (collectively, "High Risk
Activities"). CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities.
CyberPower does not authorize use of its Product in any High Risk Activities.
ANY SUCH USE IS IMPROPER AND IS A MISUSE OF THE CYBERPOWER PRODUCT.
The Limited Warranty and the Connected Equipment Guarantee are governed by the laws of the United States and
the State of Minnesota, without reference to conflict of law principles. The application of the United Nations Convention
of Contracts for the International Sale of Goods is expressly excluded.
Contact Information: CyberPower's address is 5555 12th Ave East, Suite 110, Shakopee, MN 55379 and its phone
number is (952) 403-9500 or (877) 297-6937 (toll free). CyberPower is the warrantor under this Limited Warranty. You
may also contact CyberPower on the Internet at
www.cyberpowersystems.com
.