User’s Manual BATTERY PACK (BP48V45ART2U) CyberPower Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Phone: 877-297-6937 Fax: 952-403-0009 www.CPSww.
Content INTRODUCTION ........................................................................... 2 OVERVIEW ................................................................................... 2 UNPACKING .................................................................................. 2 BASIC OPERATION ..................................................................... 2 INSTALLATION GUIDE ..................................................................... 2 BATTERY CONNECTION TO UPS ..................
Introduction Overview The CyberPower external battery pack (BP48V45ART2U) supports 45A polarized plugs, and is designed for variety of CyberPower UPS systems. When combining with the UPS, the battery pack provides extended runtime with a 48V DC external connection. Additional parallel-connected battery packs provides the UPS for a longer extended runtime operation.
Step2: Connect the External Battery Pack(s) One Battery Pack Be sure the On/Off switch position is “Off”, and then plug the Battery Pack into the UPS. Ensure the color coded Battery Pack connector lines up correctly with the colors in the UPS socket. Multiple Batteries Packs If connecting multiple Battery Packs, simply use the available socket(s) on the Battery Packs to add additional packs.
Refer to the battery connection diagram: 1. Connect the battery pack’s output cord into the UPS’s input port. 2. All battery pack module must connect in right type, red to red, black to black, green to green. 3. When connecting with numerous battery packs to extend the battery runtime, link the output plugs of all except the one that connects to the UPS. CAUTION! Before connecting to the UPS, make sure to turn off the circuit breaker. CAUTION! Do not disconnect the battery pack when UPS is operating.
Technical Specifications Model BP48V45ART2U Voltage 48V Physical Dimensions (in) 2U Rack, 17”x15”x3.5” Weight (lbs) 62 Battery Sealed Maintenance Free Lead Acid Battery 12V/7.
Product Warranty Read the following terms and conditions carefully before using the CyberPower BP48V45ART2U (the "Product"). By using the Product you consent to be bound by and become a party to the terms and conditions of this Limited Warranty and Connected Equipment Guarantee (together referred to as this "Warranty"). If you do not agree to the terms and conditions of this Warranty, you should return the Product for a full refund prior to using it. Warranty Provider CyberPower Systems (USA), Inc.
9. The Product was designed to eliminate disrupting and damaging effects of momentary (less than 1ms) voltage spikes or impulses from lightning or other power transients. If it can be shown that a voltage spike lasting longer than 1ms has occurred, the occurrence will be deemed outside the rated capabilities of the Product and the Limited Warranty is void. 10. CyberPower excludes any liability for personal injury under the Limited Warranty and Connected Equipment Guarantee.
Conformance Approvals FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING!! This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
