User’s Manual BATTERY PACK (BP48V75ART2U) CyberPower Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Phone: 877-297-6937 Fax: 952-403-0009 www.CPSww.
Content INTRODUCTION.................................................................................... 2 OVERVIEW ........................................................................................................................................... 2 UNPACKING .......................................................................................................................................... 2 BASIC OPERATION ................................................................................
Introduction Overview: The CyberPower external battery pack (BP48V75ART2U) supports 75A polarized plugs, and is designed for variety of CyberPower UPS systems. When combining with the UPS, the battery pack provides extended runtime with a 48V DC external connection. Additional parallel-connected battery packs provides the UPS for a longer extended runtime operation.
Step2: Connect the External Battery Pack(s) One Battery Pack 1 Expansion Port Provides SNMP Card Communication Push To RESET OUTPUT: AC INPUT INPUT: 48V BATTERY PACK ON OFF AC OUTPUT AC INPUT (Change Only) Plug the Battery Pack into the UPS. Ensure the color coded Battery Pack connector lines up correctly with the colors in the UPS socket.
Refer to the battery connection diagram: 1. Connect the battery pack’s output cord into the UPS’s input port. 2. All battery pack module must connect in right type, red to red, black to black, green to green. 3. When connecting with numerous battery packs to extend the battery runtime, link the output plugs of all except the one that connects to the UPS. CAUTION! If AC input charger of battery pack from UPS outlet/output, it will occupy UPS output rating.
Technical Specifications Model BP48V75ART2U Voltage 48V Physical Dimensions (in) 2U Rack, 17”x19”x3.5” Weight (lbs) 70 Battery Sealed Maintenance Free Lead Acid Battery 12V/9.
Product Registration CyberPower requests that you complete and return the Warranty Registration Card enclosed with the Product or register the Product at its website (www.cpsww.com) to establish that you are the Initial Customer of the Product, and therefore entitled coverage under the Limited Warranty and the Connected Equipment Guarantee. (Registration is not required for coverage, but note: if you do not register your purchase, you will be required to provide proof of purchase.
equipment lines or Base 10T Ethernet lines, when properly installed and connected. (This exclusion applies, for example, to fluctuations in data transmission or reception, by CATV or RF transmission or fluctuations, or by transients in such transmission.) 7. Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, abuse, misuse or alteration of either the product or the Connected Equipment. 8.
• Please be prepared to provide a description of the defect and when it happened (if available). Fine print The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. CyberPower is the warrantor under this Limited Warranty. Conformance Approvals FCC Notice This device complies with part 15 of the FCC Rules.
