User`s manual

11
Copyright © 200
9
CyberPower Systems, Inc.
Trouble Shooting
Need Additional Help?
For more information, visit eu.cyberpowersystems.com or contact.
CyberPower Systems B.V.
Flight Forum 3545 5657DW Eindhoven The Netherlands
Tel: [phone], E-MAIL: [e-mail]
CyberPower Systems Inc. (USA)
4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.
Tel: [phone], Fax: [phone], E-MAIL: [e-mail]
Entire contents copyright © 2009 CyberPower Systems, Inc.
All rights reserved. Reproduction in whole or in part without permission is prohibited.
Problem Possible Cause Solution
The UPS LCD does
not perform
expected runtime.
Do not set the UPS
to recognize the
battery pack(s).
By pressing the display toggle to
select functions. Then, set up the
correct battery pack numbers. The
default setting is 0.
The battery pack
does not work.
Batteries are not
fully charged.
Allow the battery pack to charge for
24 hours. Do not expect full runtime
during this initial charge period.
Specified battery pack models can
use AC to shorten charge time.
The status of circuit
breaker is off.
Switch on the circuit breaker.
The fuse blew.
Contact CyberPower Systems.
Open the cover on the rear panel
and replace the new fuse.