User`s manual

6
Copyright ©
200
9
CyberPower Systems, Inc.
Take the Rackmount Rail with an “L” (Left) and attach it to the rear bracket of the
Rackmount Rail using three Rackmount Rail Screws. Do not fully tighten the
Rackmount Rail screws, as the Rackmount Rails will need to be adjusted to fit your rack.
Once complete, perform the same steps for assembling the Rackmount Rail inscribed
with an “R” (Right).
Attach the Rackmount Rails to
your rack using fasteners that
are designed for your rack
system.
Complete the Rackmount Rail
installation by tightening the
screws on the Rackmount Rails.
Slide the UPS on top of the
newly installed Rackmount
Rails, and secure the UPS to
your existing rack system [via
the Rackmount Ears] using
fasteners that are designed for
your rack system.