User Manual

LIMITED LIFETIME WARRANTY AND CONNECTED
EQUIPMENT GUARANTEE
Read the following terms and conditions carefully before using
the CyberPower MPV615S (the “product”). By using the product,
you consent to be bound by the terms and conditions of this
limited lifetime warranty and connected equipment guarantee
(together referred to as this “warranty”). IF YOU DO NOT AGREE
TO THE TERMS AND CONDITIONS OF THIS WARRANTY, YOU
SHOULD RETURN THE PRODUCT FOR A FULL REFUND PRIOR
TO USING IT.
Who is providing this warranty, and what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”) provides this
limited lifetime warranty. It only covers the original purchaser and
ends if you no longer own the product. This warranty covers
defects in materials and workmanship in the product under
normal use and conditions. It also covers equipment connected
to the product and damaged because of the failure of the
product. This warranty covers the product and connected
equipment for as long as you own the product.
How do you open a connected equipment claim?
1. Call us at [phone], or write to us at:
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400
Shakopee, MN 55379,
or send us an email at [e-mail] within 10 days of
the occurrence for instructions.
2. When you contact CyberPower, identify the product, the
purchase date, and the item(s) of connected equipment. Have
information on all applicable insurance or other resources of
recovery/payment that are available to the initial customer, and
request a claim number.
3. You must provide a dated purchase receipt (or other proof of
the original purchase) for the CyberPower unit and connected
equipment. You also need to provide a description of the
damage to your connected equipment.
4. Pack and ship the product to CyberPower and the item(s) of
connected equipment, a repair cost estimate for the damage
to the connected equipment, and all claim forms that
CyberPower provides to you. Show the claim number on the
shipping label, or include it with the product. You must prepay
all shipping costs. You are responsible for packaging and
shipment, and you must pay the cost of the repair estimate.
What will CyberPower do to correct problems?
CyberPower will inspect and examine the product. If the product
is defective in material or workmanship, CyberPower will replace
it at CyberPower’s expense, or CyberPower will refund the full
purchase price you paid for the product (purchase receipt
showing price paid is required). If the product failed to protect
any equipment plugged into it, we will also send you forms for
making your claim for the connected equipment. We will repair
or replace the equipment that was damaged because of the
failure of the product or pay you the fair market value (NOT
REPLACEMENT COST), of the equipment at of the time of the
damage. We will use Orion Blue Book, another third-party
valuation guide, eBay, Craigslist, or other source to establish that
amount. Our maximum liability is limited to $150,000 for
the MPV615S.
Who pays for shipping?
We pay shipping when we send items to you; you pay when you
send items to us.
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT
WAS DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED
DUE TO THE FAILURE OF THE PRODUCT, OR ANY DATA
THAT IS LOST AS A RESULT OF THE FAILURE. THIS
WARRANTY DOES NOT COVER THE RESTORATION OF DATA
OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.
2. This warranty does not cover: misuse, modification, operation
or storage outside of the environmental limits of the product
or the equipment connected to it. It does not cover damage
while in transit or in storage; if there has been improper
operation or maintenance, or use with items not designed or
intended for use with the product, such as laser printers,
appliances, aquariums, medical, or life support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the initial customer are those
provided by this warranty.
CyberPowerSystems.com
© 2020 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
This device is manufactured using environmentally-safe
procedures in compliance with the Restriction of Hazardous Substances
(RoHS) directive.
Please join CyberPower in caring for the environment by recycling.
UL Listed to U.S. and Canadian Safety Standards UL2930 and UL1449.
This product is listed to applicable U.S. and Canadian safety standards
by Underwriters Laboratories Inc.
WARNING: This product can expose you to chemicals including bisphenol A (BPA)
and styrene (ABS), which is known to the State of California to cause reproductive harm
and cancer. For more information, go to www.P65Warnings.ca.gov.
3 4
K01-0000820-01
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry
locations and only indoors. Use only with duplex receptacle
having center screw. DO NOT plug into another health care outlet
assembly, a relocatable power tap, or an extension cord. Connect
only AUTHORIZED medical equipment verified for safe touch and
leakage current. DO NOT “daisy chain” surge protectors. DO NOT
use with any aquarium equipment. DO NOT use if properly
grounded outlets are not available. DO NOT install this device if
there is less than 10 meters (30 feet) or more of wire between the
electrical outlet and electrical service panel.
Not for Home Health Care Use.
WARNING: RISK OF DEATH OR SERIOUS INJURY. Only plug into
a permanently installed branch circuit receptacle and use within
the Patient Care Vicinity only when a protective earth grounding
conductor also connects the Equipment Grounding (Protective
Earth) Terminal to the Patient Equipment Grounding Point.
WARNING: After verifying the combined touch and leakage
current secure the outlet covers closed.See installation
instructions for tightening details.
WARNING: To reduce the risk of fire, electric shock, or injury
to persons:
- Use this HCOA (Health Care Facility Outlet Assembly) only for
its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
- Never operate this HCOA if it has a damaged cord or plug, if it is
not working properly, if it has been dropped or damaged, or
dropped into water.
- Keep the cord away from heated surfaces.
- Do not use outdoors.
- Do not place on floor.
- Mount and position to prevent any liquid from entering the HCOA.
WARNING: RISK OF ELECTRIC SHOCK - Connect this HCOA to a
properly grounded Hospital Grade (green dot) Receptacle only.
Grounding Instructions: This product must be grounded and, when
used within a Patient Care Vicinity, must also be grounded to the
Patient Equipment Grounding Point. If malfunction or insulation
breakdown occurs, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This product
is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. This product is also
provided with a “Patient Equipment Grounding Terminal” (or jack)
for connection of a “Patient Equipment Grounding Conductor”
which in turn must be connected to the “Patient Equipment
Grounding Point” before use within any “Patient Care Vicinity” 6ft
(1.8m), beyond the patient bed, chair, table, treadmill, or other
device that supports the patient during examination and treatment.
DANGER: Improper connection of the equipment-grounding
conductor and Protective Earth Grounding Conductor can result in
a risk of electric shock.
Check with a qualified electrician or service person if you are in
doubt as to whether the product is properly grounded.
Check to see that the HCOA rating is suitable for the application.
The total true R.M.S. current draw of the devices to be protected
should not exceed 15 Amps (or 20 Amps based on the model).
SAVE THESE INSTRUCTIONS
TECHNICAL SUPPORT
Please contact our Tech Support Department with installation,
troubleshooting, or general product questions.
• Phone: [phone]
• Email: [e-mail]
• Hours of Operation: Monday – Friday 7:00am – 6:00pm CST
1. This warranty does not apply unless the product and the
connected equipment were connected to properly wired and
grounded outlets (including compliance with electrical and
safety codes of the most current electrical code), without the
use of any adapters or other connectors.
2. The product must have been plugged directly into the power
source. The equipment connected to the product must be
directly connected in the product, not “daisy chained”
together in serial fashion with any extension cords, another
product, or device similar to the product, surge suppressor, or
power tap. Any such installation voids the warranty.
3. The product and connected equipment must have been used
properly in a suitable environment, in conformance with any
applicable license, instruction manual, or warnings.
4. The product must have been used at all times within the
limitations on the product’s maximum rated wattage.
Where can I get more information?
Contact us at:
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400
Shakopee, MN 55379;
Call us at [phone];
Send us an email message at [e-mail].
PRODUCT REGISTRATION
Prompt product registration assures coverage under the limited
lifetime warranty, and also allows the opportunity of notifications
for product enhancements, upgrades, and other announcements.
Registration is quick and easy. Go to the Product Registration
Page at CyberPowerSystems.com/registration.
CONTACT INFORMATION
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400
Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPowerSystems.com