User's Manual

WARNING
IDENTIFYING THE CORRECT VOLTAGE AND POLARITY
SETTINGS FOR THE CONNECT EQUIPMENT AND
ADJUSTING THE PRODUCT ACCORDINGLY IS THE USER’S
RESPONSIBILITY.
Caution: This device is intended to input 120V AC power,
all necessary safety precautions should be followed. Not
recommended for use by children.
Failure to adjust the adapter settings to match the
requirements of the connected device can result in damage to
the device.
1. Identify the correct plug tip that ts in the device you wish
to power.
2. Identify the polarity required for the device you are
connecting. The polarity will typically be identied in either
the user’s manual or on the input specications on the
device itself (see ‘Polarity Markings’ section). Turn the tip
you are inserting into the adapter cord so that the ‘
4’ text
on the tip lines up with either the ‘+’ or ‘–‘ symbol on the
adapter cord depending on whether positive ‘+’ or negative
‘–‘ polarity is required. If the device is not polarized, either
setting can be used. If the device does not have a polarity
specication, contact the manufacturer of the device and
ask them. Using an incorrect polarity can damage the
device.
3. Set the voltage switch to the required voltage for the device
you are connecting. The voltage required will typically
be identied in either the user’s manual or on the input
specications on the device itself. If you cannot determine
the proper voltage, contact the manufacturer of the device
and ask them. Using an incorrect voltage can damage the
device.
4. Plug the adapter cord into the device then plug the AC power
cord for the adapter into a standard 120V outlet. If the device
does not function, unplug the AC power cord from the outlet
immediately. Check to make sure the voltage and polarity
settings being used are correct.
PolARIty MARkINGs
When looking for polarity markings on the device you wish to
power with the CyberPower Universal AC adapter, they will
typically be identied as such:
Depending on the device, the orientation of the positive and
negative poles in the depiction may be reversed but, if the
device requires positive polarity, the ‘–’ symbol will be on the
side with the ‘C’ shaped arc. If negative polarity is required,
the ‘+‘ symbol will be on the side with the ‘C’ shaped arc.
1 yeAR lIMIted WARRANty
CyberPower warrants the Universal Power Adapters to be
free from defect in material or manufacturing for one years.
If a defect results in product failure during its normal use,
CyberPower’s sole responsibility is to repair or replace (as
its sole option) the Universal Power Adapter. The foregoing
Limited Warranty is the consumer’s sole and exclusive remedy
and excludes any incidental or consequential damages. Some
States do not allow the exclusion or limitation of incidental
and consequential damages, so certain parts of the above
limitations or exclusions may not apply to you (the Consumer).
This limited warranty gives the Consumer specic legal rights
and the Consumer may have other rights, which vary from
State to State.
To make a warranty claim call technical support
toll-free at 1-877-297-6937 between 8am and 5pm CST,
Monday – Friday.
CoNtACt INFoRMAtIoN
CyberPower Systems, Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CPSww.com
UNIveRsAl AC AdAPteR
CPUAC1U1300
UseR MANUAl
K01-0000255-00
© 2012 CyberPower Systems, Inc. All rights reserved.
All other trademarks are the property of their respective owners.
4.567.5912 3
Voltage Selector
5
USB
Up to 1300mA