User Manual

Copyright © 2016 CyberPower Systems, Inc. 6
BATTERY REPLACMENT PROCEDURE
*BATTERY WIRING
Connect RED battery cable/connector to RED connector (positive to positive) on battery pack.
Connect BLACK battery cable/connector to BLACK connector (negative to negative) on battery pack.
REMINDER! The used batteries are considered hazardous waste and must be disposed through
recycling. Most retailers that sell lead-acid batteries collect used batteries for recycling, as required by the
local regulations.
BATTERY REPLA
CEMEN
T
(continued)
1
2
4
3
Disconnect the black wire and red wire
from the battery.
Remove the front panel on the right
side.
Insert the new battery pack. Assemble
the screws, cable and front panel in
the reverse sequence of above steps.*
Recharge the unit for 18 hours to
ensure the UPS performs expected
runtime.
Remove the four retaining screws.