How to Guide

8-Outlet Surge Protector
P604URC1
User’s Manual
8-Outlet Surge Protector (6 AC & 2 USB Ports)
P604URC1
This device is manufactured using environmentally-
safe procedures in compliance with the Restriction
of Hazardous Substances (RoHS) directive.
Please join CyberPower in caring for the
environment by recycling this manual.
FEATURES
1. ON/OFF Reset Lighted Switch Breaker
Controls power to all outlets. The switch is also a 15A breaker. When an
overload occurs, it will automatically switch off. To resume operation,
ensure the overload condition is corrected and reset the surge protector
by switching the unit ON.
2. Surge Protected Indicator
Illuminated when the surge protection is working properly.
3. USB Charging Ports*
Connect and charge up to two (2) USB devices using the surge protected
USB charging ports.
*USB outlets cannot be used as a USB hub. This device does not transfer
data.
4. Six Standard Outlets
5. Safety Covers
All AC outlets on this surge protector include safety covers. To ensure the
safety of children and to avoid electric shock and damage from a
high-dust environment, slide the plastic outlet cover closed on outlets
that are not used.
SPECIFICATIONS
• Model Number: P604URC1
• Outlets: 6 Standard Outlets, 2 USB Charger Ports
• Surge Protection: 500 Joules
• Electrical Rating: 125V/15A/1875W
• USB Charger Rating: 5V/2.4A total
• UL Clamping Voltage: UL 1449 3rd/800V(L-N)
• Maximum Peak Current: 15,000A
• AC Lines Protected: L-N: 800A
• Response Time: Less than 1 nanosecond
• Circuit Breaker: Resettable 15 Amp
TROUBLESHOOTING
If the ON/OFF is switched OFF, the 15 AMP circuit breaker may have tripped.
Examine your connected equipment and remove the device that is
overloading the circuit. Then, turn the ON/OFF switch back to RESET.
If the Protected indicator does not light, the surge protector’s AC line is no
longer protected from a surge. Replace the surge protector. The surge
protector may have received a power surge or spike beyond its specified
limits that overloaded the protection circuitry and rendered it inactive. The
surge protector has protected your connected equipment but it will not
protect against future surges and spikes.
Where can I get more information?
Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us
at [phone]; or send us an e-mail message at [e-mail].
PRODUCT REGISTRATION
Prompt product registration assures coverage under the Limited Warranty, and
also allows the opportunity to be notified of product enhancements, upgrades,
and other announcements.
Go to Product Registration page at www.cyberpower.com
CONTACT INFORMATION
Cyber Power Systems, Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPower.com
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1. This device may not cause
harmful interference, and 2. This device must accept any interference received,
including interference that may cause undesired operation. Changes or modifications
not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This Class B digital apparatus complies with
Canadian ICES-003.
Note: These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and only
indoors. Use only with duplex receptacle having center screw.
DO NOT plug into another relocatable power tap. DO NOT “daisy chain” surge
protectors.
DO NOT use with any aquarium equipment. DO NOT use if properly grounded
outlets are not available. DO NOT install this device if there is not at least 10
meters (30 feet) or more of wire between the electrical outlet and electrical
service panel. This device features an internal protection that will disconnect
the surge protective component at the end of its useful life, but will maintain
power to the load – now unprotected.
TECHNICAL SUPPORT
Please contact our Tech Support department with installation,
troubleshooting, or general product questions.
• Phone: [phone]
• Email: [e-mail]
• Hours of Operation: Monday – Friday, 7:00am – 6:00pm CST
LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE
Read the following terms and conditions carefully before using the CyberPower
P604URC1.
By using the P604URC1, you consent to be bound by the terms and conditions
of this Limited Warranty and Connected Equipment Guarantee (together
referred to as this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS AND
CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A
FULL REFUND PRIOR TO USING IT.
Who is providing this Warranty, what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”) provides this Limited
Warranty. It only covers the original purchaser and ends if you no longer own
the P604URC1. This warranty covers defects in materials and workmanship in
the P604URC1 under normal use and conditions.
It also covers equipment connected to the P604URC1 and damaged because of
the failure of the P604URC1.
This warranty covers the P604URC1 and connected equipment for as long as
you own the P604URC1.
How Do You Open A Connected Equipment Claim?
1. Call us at [phone] or write to us at Cyber Power Systems (USA), Inc.,
4241 12th Ave. E., STE 400, Shakopee, MN 55379, or send us an e-mail
message at [e-mail] for instructions, within 10 days of the
occurrence.
2. When you contact CyberPower, identify the Product, the Purchase Date, and
the item(s) of Connected Equipment. Have information on all applicable
insurance or other resources of recovery/payment that are available to the
Initial Customer and Request a Claim Number.
3. You must provide a dated purchase receipt (or other proof of the original
purchase) for the Cyber Power unit and connected equipment. You also
need to provide a description of the damage to your connected equipment.
4. Pack and ship the product to CyberPower and, if requested, the item(s) of
Connected Equipment, a repair cost estimate for the damage to the
Connected Equipment, and all claim forms that CyberPower provides to you.
Show the Claim Number on the shipping label or include it with the product.
You must prepay all shipping costs, you are responsible for packaging and
shipment, and you must pay the cost of the repair estimate.
What will CyberPower do to correct problems?
CyberPower will inspect and examine the P604URC1. If the P604URC1 is
defective in material or workmanship, CyberPower will repair or replace it at
CyberPower’s expense, or CyberPower will refund the full purchase price you
paid for the P604URC1 (purchase receipt showing price paid is required). If the
P604URC1 failed to protect any equipment plugged into it, we will also send
you forms for making your claim for the connected equipment. We will repair
or replace the equipment that was damaged because of the failure of the
P604URC1 or pay you the fair market value (NOT REPLACEMENT COST) of the
equipment at of the time of the damage. We will use Orion Blue Book, another
a third-party valuation guide, eBay, Craigslist, or other source to establish that
amount. Our maximum liability is limited to $50,000.
Who pays for shipping?
We pay when we send items to you; you pay when you send items to us.
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT WAS DAMAGED
OR NEEDS TO BE REPLACED DUE TO THE FAILURE OF THE P604URC1 OR ANY
DATA THAT IS LOST AS A RESULT OF THE FAILURE OR THE RESTORATION OF
DATA OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.
2. This Warranty does not cover: misuse, modification, operation or storage
outside environmental limits of the P604URC1 or the equipment connected
to it, damage while in transit or in storage, improper operation or
maintenance, or use with items not designed or intended for use with the
P604URC1, such as laser printers, appliances, aquariums, medical or life
support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the Initial Customer are those provided by
this Warranty.
1. This Warranty does not apply unless the P604URC1 and the connected
equipment were connected to properly wired and grounded outlets
(including compliance with electrical and safety codes of the most current
electrical code), without the use of any adapters or other connectors.
2. The P604URC1 must have been plugged directly into the power source and
the equipment connected to the P604URC1 must be directly connected in
the P604URC1, not “daisy-chained” together in serial fashion with any
extension cords, another Product or device similar to the P604URC1, surge
suppressor, or power tap. Any such installation voids the Warranty.
3. The P604URC1 and connected equipment must have been used properly in a
suitable and proper environment, in conformance with any applicable
license, instruction manual, or warnings.
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower P604URC1 Surge Protector. The
information contained in this brochure explains the features and operation of the
P604URC1 Surge Protector. Please take a few moments to read this manual.
1
2
3
4
K01-1101023-00
K01-0000534-02
5