User Manual

Switched Series Metered/Monitored Series

1U 1U

PDU15SW10ATNET PDU15M10AT

PDU20SW10ATNET PDU20M10AT

PDU20SWT10ATNET PDU20MT10AT

PDU20SWHVT10ATNET PDU20MHVT10AT

PDU15SWHVIEC12ATNET PDU15MHVIEC12AT

PDU20SWHVIEC10ATNET PDU20MHVIEC10AT

PDU20SWHVCEE10ATNET PDU20MHVCEE10AT

2U 2U

PDU30SWT17ATNET PDU30MT17AT

PDU30SWHVT19ATNET PDU30MHVT19AT

Overview

Model List

CyberPower Automatic Transfer Switches equip with dual sources that can provide

redundant and more reliable power to critical devices with single input. Users

can define Source A or B as preferred power supply. When selected source is

unstable or unavailable, ATS will switch to another source to constantly provide

power to connected devices. The entire ATS series are designed with LED plus LCD

interfaces so that users can easily observe power status and device load. On-site

power management is accomplished as users can configure power settings via

LCD interface according to local power condition. Offered with both switched and

metered/monitored type ATS, therefore, users can choose the most suitable one

based on their needs.

Safety Precautions

Read the following before installing or operating the

Automatic Transfer Switches (ATS):

• Use only the supplied hardware to attach the mounting brackets.

• The ATS must be plugged into a single phase three-wire, grounded outlet on

a circuit that is protected by a fuse or circuit breaker. For PDU15xxxxx series,

please use 15A circuit protector. For PDU20xxxxx series, please use 20A

circuit protector. For PDU30xxxxx series, please use 30A circuit protector.

Connection to any other type of power outlet may result in a shock hazard.

• Do not use extension cords or adapters with this ATS.

• Never install an ATS or associated wiring or equipment during a lightning storm.

• Ensure that the power cord, plug, and socket are in good condition.

To prevent the risk of fire or electric shock, this ATS should be installed in a

temperature and humidity controlled indoor area free of conductive contaminants. Do

not install this ATS where excessive moisture or heat is present.

Before using, please check to ensure the package contains all the items shown below.

If there are missing parts, please contact your local CyberPower sales team for

technical support.

Check