User manual

Step 3. Authentication

Enter the user name and password of the ATS PDU at the Authentication menu

(shown in Figure 7.)

Note: The default username is “cyber” and the default password is “cyber”.

Advanced Settings

Timeout Settings

The Timeout Setting (Shown in Figure 8.). [Edit=>Timeout Settings] is used to

specify the wait time when scanning for network ATS PDUs. When there are many

devices on the local network, it may take extended periods of time to locate all

the devices. The timeout function is used to limit the search time.

The default setting is 3 seconds. Valid values are 3 to 60 seconds.

Figure 7. Authentication screen

Figure 8. Timeout Setting

Appendix B-Power Device Network Utility