User Manual

Step 2. Attach IEC Socket Power Cord Stand on the ATS and secure it with removed

screws in the previous step.

Step 3. Attach Cable Tie on the IEC Socket Power Cord Stand and secure it with

provided screw.

Step 4. Place a Power Cord Retention Cable Clip on the power cord. Align and

Insert the Cable Tie into the Cable Clip as shown in the figure below.

Step 5. Push the Power Cord Retention Cable Clip until it touches the plug and

fasten the Retention Cable Clip like the figure below.

Power Cord Retention Clip Installation

Step 1. Remove screws next to the outlet where IEC Socket Power Cord Stand will

be installed.

Installation Guide