User manual

RJ45/DB9 Serial Port
Connection Cable
Cable Ties / Qty. 20
10 (M3x6) Cord Retention Tray
Mounting Screws
(Includes two spares)
6 (M5x12) Screws / 6 Washers
(Includes two spares for each)
10 (Flat Head M4x8) Bracket Mounting
Screws (Includes two spares)
PDU
Mounting Brackets x 2
Registration
Card
User Manual Registration Card CD
Cord Retention Trays x 2
Documentation
Before using, please check to ensure the package contains all the items shown above. If there
are missing parts, please contact CyberPower technical support at [e-mail] or call
1-877-297-6937 when you are US customers. For European customers, please contact
CyberPower at [e-mail].
Safety Precautions
Read the following before installing or operating the
Power Distribution Units (PDU):
Use only the supplied hardware to attach the mounting brackets.
The PDU must be plugged into a three-wire, grounded outlet on a circuit
that is protected by a fuse or circuit breaker. For PDU15xxxxx series,
please use 15A circuit protector. For PDU20xxxxx series, please use 20A
circuit protector. For PDU30xxxxx series, please use 30A circuit protector.
Connection to any other type of power outlet may result in a shock hazard.
Do not use extension cords or adapters with this PDU.
Never install a PDU, or associated wiring or equipment, during a
lightning storm.
Ensure that the power cord, plug, and socket are in good condition.
CAUTION!!
To prevent the risk of fire or electric shock, this PDU should be installed in a temperature
and humidity controlled indoor area free of conductive contaminants. Do not install this
PDU where excessive moisture or heat is present.
Introducon
Package Contents
(For 2U Series)
CyberPower
Reliability. Quality. Value.
R
User's Manual
3 4
Front panel description
NEMA Type
1 2 3 4 5 6 7 8
Select
KW
Volts
Amps
- Normal
- Warning
- Overload
Tx/Rx
Link
Reset
YU0-0000026-00
PDU20SWHVIEC8FNET
A. Power Cord
B. AC Output Outlets
C. Current Level
D. Input Voltage
E. Power
F. Load Indicator
G. Ethernet Port
H. Tx/Rx Indicator
I. Link Indicator
J.
Outlet Indicator
(switched series only)
K. Serial/ ENVIROSENSOR Port
(RJ45 modular port)
L. Select Button
M. PDU Status Screen
N. Reset Button
Rear panel description
Technical Specificaon
Product Features (1U 15A Series)
IEC Type
1 2 3 4 5 6 7 8
Select
KW
Volts
Amps
- Normal
- Warning
- Overload
Tx/Rx
Link
Reset
PDU15SWHVIEC8FNET
A
A. External Site Ground
Model Name PDU15SW8FNET
PDU15SWHVIEC8FNET
PDU15M8FNET PDU15MHVIEC8FNET
Input
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Frequency
Derated Input
Current
12A 12A(UL)/10A(CE) 12A 12A(UL)/10A(CE)
Plug Type NEMA 5-15P IEC-320 C14 NEMA 5-15P IEC-320 C14
Power Cord Type SR (14 AWG) Socket SR (14 AWG) Socket
Power Cord
Length
12 ft/3.65 m 10 ft/3.05 m 12 ft/3.65 m 10 ft/3.05 m
Output
Nominal Voltage 100-120V 200-240V 100-120V 200-240V
Derated Output
Current
12A 12A(UL)/10A(CE) 12A 12A(UL)/10A(CE)
Outlet Type NEMA 5-15R IEC-320 C13 NEMA 5-
15R IEC-32
0 C13
Outlet Number
Networking
Protocol Support
Connectivity
Physical
Dimension
(H x W x D)
Environmental
Humidity
Altitude
Temperature
Safety Approvals
Certifications
UL 60950-1
CSA C22.2
FCC Class A
UL 60950-1
CSA C22.2
CE, FCC Class A
UL 60950-1
CSA C22.2
FCC Class A
UL 60950-1
CSA C22.2
CE, FCC Class A
Warranty
Product Warranty
Switched Series (1U 15A) Monitored Series (1U 15A)
8
50/60Hz
3 years
RJ45
1.75" x 17.05" x 4.41"/44mm x 433mm x 112mm
TCP/IP, UDP, DHCP, SNMP, HTTP
0 to 95% Non-condensing
14700 ft/4500 m
3
2℉
to 104℉/0℃ to 40℃
A
G I
E H
B
D F
J N
L
MA K
C
G I
E H
B
D F
J N
L
MA K
C