User Manual

114
 Outlet Off: The outlets which are not supplying power.
 Power Source: The power source of the UPS, e.g. Utility or Battery.
 Remaining Runtime: The estimated amount of time remaining that the UPS can supply power, given its current
load.
 Capacity: The capacity of the batteries expressed as a percentage of full charge.
 Statistics: Indicates the state of the device as Normal, Severe, Warning or Lost.
 Severe: Devices with severe-level events such as Overheat or Output is off.
 Warning: Devices with warning-level events such as Utility power failure or Battery need replacement.
 Lost: Devices which have lost communication with Center.
 Type: The type of software the selected device is running, e.g. Agent, Client or Equipment.
 Current Source: Indicates which input source is being using and will be also annotated preferred or redundant
source.
 Environment Sensor: Indicates whether the environment sensor has been installed on the UPS/PDU/ATS. Note:
When the sensor cannot be detected anymore, it will be annotated No Response. Users can click the Uninstall to
reflect it if it had been removed physically from the UPS/PDU/ATS.
Status
The Status tab displays details about the UPS/PDU/ATS.
 Current: The output current in Amps.
 Outlets: The status of each outlet on the UPS/PDU/ATS and the name of the connected computer or equipment.
 Input: Displays the status of the utility power supplied to the UPS.
 Voltage: The voltage of the utility power supplied to the UPS.
 Frequency: The frequency of the utility power supplied to the UPS in Hertz.
 Output: Displays the status of the output power that is being supplied to connected equipment.
 Load Consumption: The power draw of the connected equipment expressed as a percentage of the total load
capacity. This displays as watts on some UPS models.
 Battery: Displays the status of the battery packs.
 Capacity: The capacity of the batteries, expressed as a percentage of full charge.
 Remaining Runtime: The estimated amount of time that the UPS can supply power to its load.
 System: Displays the operating status of the UPS.
 Environment Temperature: Indicates the measured temperature from the environment sensor.
 Environment Humidity: Indicates the measured humidity from the environment sensor.
 Contact: Indicates generic equipment connects to this sensor. Users can define the name and state in RMCARD
web for each contact and monitor the state is normal.
 Source A Voltage: The voltage of the input power supplied to the source A of ATS.
 Source B Voltage: The voltage of the input power supplied to the source B of ATS.
 Load: The power draw of PDU/ATS supplying power to connected equipment.
 Bank # Load: The power of the PDU/ATS bank supplied power to the connected equipment.
Information