User Manual

118
Note: If a PDU is connected to a UPS, a power off or a power cycle to the UPS may also cause all computers on this
PDU to shutdown.
Battery Test
Click Battery Test from the context menu and the UPS will initiate a battery test.
Mute
Click Mute from the context menu to mute the alarm.
Alarm
Click Alarm from the context menu to enable or disable the UPS alarm.
Preferred Source
Click Preferred Source from the context menu to select which input source to be preferred to use.
Group Management
UPS/PDU/ATSs can be grouped for easy management. Orders can then be issued to multiple devices in a group.
Add Group
Click Add Group on the toolbar to create a new group.
Add Group button on toolbar
You can also add sub-groups in the context menu of a selected group. Enter the new group name and click OK button
to add a new group.
Move Group
Select the group you wish to move and select Move in the context menu. Select the target group from the list in the
Move Group window. After selecting the target group, click OK to move the group.
Remove Group
Choose a group and select Remove from the context menu. The Remove window will open; click OK to remove this
group. Removing a group will not remove the sub-groups or the UPS/PDU/ATSs belonging to this group. These
items will be moved to the main group.
Rename Group
Choose group and select Rename from the context menu. The Rename Group window will appear and requires new
group name to replace origin one. Enter the new group name and click. When a group has been deleted, the sub-
groups and devices will be moved to main group. Note that a duplicate group name is not allowed.