User Manual

124
Note: If the device is not monitored by Center, it will not be shown in the power tab. The detail of the power
connection displays unknown instead.
IT Equipment Operations
Shutdown/Restart
Select Shutdown or Restart from the context menu and a confirmation window will appear. Click OK to initiate the
shutdown or restart. This is only valid for a computer with Agent or Client installed.
Power Control
 Power Off: Select Power Off from the context menu. Decide whether to turn off the outlet immediately or in
sequence. Click OK to begin. A computer which has Agent or Client installed will initiate a graceful shutdown prior
to turning off the outlet.
On specified modes, turning off or restarting one outlet of the bank will also turn off other outlets of this bank. This
may cause other computers on this bank to be shut down unexpectedly.
 Power On: Select Power On from the context menu. Decide whether to turn on the outlet immediately or in
sequence. Click OK to turn on the outlet.
 Power Cycle: Select Power Cycle from the context menu. Decide whether to restart the outlet. Click OK to restart
the outlet. A computer which has Agent or Client installed will also initiate a shutdown prior to the power cycling.
Turning off the outlet of a bank or restarting the outlet of the bank will also cause other computers on other outlets
to be shut down.
Locate
Select Locate from the context menu. The computer uses speakers to generate the audible sounds.
IT Equipment
 Monitor the status of computers and equipment connected to the UPS/PDU/ATS.
 Issue orders such as shutdown or restart when the connected outlet is being turned off or turned on.
 Request computers perform a shutdown or a reboot.
 Manage computers and equipment in a group, and issue orders to grouped computers or equipment.