User Manual

34
Quick Configuration
A Welcome screen will display at the first time to use Agent and Client. The welcome screen will lead you to complete
the quick configuration. You can decide whether to continue or ignore it. It is strongly recommended to complete the
quick configuration. Inability to complete the quick configuration may put your computer in the extreme risk when
power events occur. If you decide to ignore the quick configuration, click the Exit button. A popup confirm dialog will
display and click the Yes button to ignore the quick configuration. Refer to the installation guide accordingly for more
details to complete the quick configuration.
Essential Setup
In order to ensure the PowerPanel
®
Business Edition software functions properly, make sure that the Agent, Client
and Center have been configured correctly.
Agent
 Perform a battery test to verify the UPS can supply battery power to the connected equipment and the equipment
operates properly. See the UPS/Diagnostics section for more details.
Client
 Set the port used by Client on the Security/Network page to match the port used by the Agent’s port.
Center
 In order to establish communication with the UPS, PDU, Agent or Client. Set the SNMP Community to the same
one used in the UPS/PDU/ATS, or the Secret Phrase used by the remote card of UPS, PDU, Agent or Client on
the Security/Authentication page.
 Setup that the port used by the Center on the Security/Network page to match the port used by the Agent or
Client.