User Manual

41
 Module Status: Displays the present operating status of each UPS module.
 Normal: The module is operating normally.
 Offline: The module is not installed.
 Rectifier Fault: The module rectifier is faulty and stops output power.
 Inverter Fault: The module inverter is faulty and stops output power.
 Inverter Protected: The module inverter has been protected and stops operating.
 Rectifier Overheat: The internal temperature of module rectifier exceeds the normal rating.
 Inverter Overheat: The internal temperature of module inverter exceeds the normal rating.
 Inverter Overload: The module inverter is overloaded.
 Inverter Extended Overload: The module’s inverter has been overloaded for intolerable duration; the UPS
will stop output power soon.
 Fan Fault: The module fan is faulty. It may cause overheat in module.
 Shutdown: The module has been shut down and stopped its output power.
Note: Not all models provide the same information. The information displayed will vary by model.
Information
UPS/Information page of a PR1000LCDRTXL2Ua