User Manual

42
The UPS/Information page shows information about the UPS:
 Model: The model name of the UPS.
 Firmware Version: The firmware version of the UPS.
 Serial Number: The serial number of the UPS.
 UPS Type: The type of the UPS. e.g. On-Line, Line Interactive or Sine wave Line Interactive.
 Power Rating: The Volt-Amp rating and power rating (Watts) of the UPS.
 Current Rating: The output current rating (Amps) of the UPS.
 Voltage Rating: The input voltage range (Volts) of the UPS.
 Frequency Rating: The input frequency range (Hz) of the UPS.
 Next Battery Replacement Date: The next date that the batteries should be replaced. This date only changes
based on the Battery Replacement Date.
Battery Replacement Date is the date that batteries have been replaced. This date should be changed
immediately after the battery replacement or when the unit is first purchased. The battery lifetime varies by UPS
models. Once battery replacement date is changed, the software will alert the customer when the battery age has
reached the lifetime.
 NCL Outlet: The amount of the Non-Critical Load outlets.
 LCD Firmware Version: The firmware version of the LCD screen on the UPS.
 USB Version: The version of the USB chipset on the UPS.
 Extended Battery Pack: The amount of extended battery packs connected to the UPS.
 Installation Place: Clicking the Find it button will ask alarm to beep or indicators to blind in order to inform users
of the location. This helps users to identify the specific UPS at installation sites with multiple UPS units.
Note: Not all models provide the same information. The information displayed will vary by model.