User Manual

49
Diagnostics
The UPS/Diagnostics page provides the ability to verify that the UPS can supply adequate battery runtime for the
connected computers to shutdown properly. Perform a complete runtime calibration to ensure an accurate estimate of
the runtime for the connected load. The buzzer can be tested to ensure that the UPS can issue an alarm and that the
indicator lights will display properly if requested by the UPS.
UPS/Diagnostics page
Battery Test
The Battery Test performs a battery test to verify that the batteries are good, and shows information including the
result and the date of the last battery test. Click the Initiate button to begin a battery test. Performing a battery test is
prohibited when the Frequency Working Mode option is set to fixed.
The results will be reported after a battery test completes:
 Last Test Date: The date the last battery test was performed.
 Last Test Result: The result of the last battery test:
 Passed: The battery performed normally during the test.
 None: The UPS has never performed the battery test.