User Manual

Load

The UPS supplies power to generic equipment and shutdown-protected computers that connect to native outlet

sockets of UPS or extended PDU. The UPS/Load page provides detailed information about connected loads and the

extended PDU.

PowerPanel Business Edition Agent: UPS/Load page

Manage Loads

Users can manage connected loads that include generic equipment and computers from the Load Management page.

A UPS and named PDU tabs whose lists contain connected loads. All connected loads can be listed with detailed

information including the name, location, contact, and what type of outlet the equipment is plugged in from the list.

 Plug a load on UPS or PDU. Select the UPS or one of the named PDU tabs, click the target outlet from the list,

and ensure the outlet from the Outlet Preview is correct, then click the Setup button on the target outlet to open

the Load Setup wizard, and follow the following steps to plug a load:

 If you want to plug-in a computer that has PowerPanel Business Edition Client software installed,

choose Computer Equipment with installed PPBE Client software, and enter the IP address of the

computer or select it from the drop-down list. Otherwise, choose Generic Equipment Without installed

PPBE Client software. Click Next to continue.