User Manual

 ATS has automatically switched to redundant power source. The primary power source has failed or is

experiencing a power event, the ATS has automatically switched to the redundant power source.

 ATS redundant power source has experienced a power failure. The primary ATS power source is functioning

but the redundant source is experiencing a power failure or power event. If the primary power source fails, the

ATS will not switch to the redundant power source.

 ATS is faulty. ATS has an internal malfunction and may not operate properly.

More events are available for the environment sensor within UPS/PDU/ATS in Client:

 Environmental sensor is not responsive. Environmental sensor of the UPS/PDU/ATS is not responding. The

sensor may be malfunctioning or has been removed from the UPS/PDU/ATS.

 Temperature is over the high threshold. The temperature measured by the sensor has crossed the high

threshold.

 Temperature is under the low threshold. The temperature measured by the sensor has crossed the low

threshold.

 Humidity is over the high threshold. The relative humidity measured by the sensor has crossed the high

threshold.

 Humidity is under the low threshold. The relative humidity measured by the sensor has crossed the low

threshold.

Principles for Client Firing Events

If both input power sources for the ATS are UPS units, failure events will only fire if both UPS units are affected. If

there is a single UPS as an input power source (or no UPS), failure events will fire in the case of a power failure.

Note: In Client, events will be divided into categories according to its power connection. Each event has individual

settings for each category.

Notification Recipient

Event Receivers

PowerPanel Business Edition Agent and Client can send notifications to multiple recipients in various ways, including

Windows Alert Messages, Instant Messages and mobile phone text messages (SMS). The Notification Recipient

page lists all recipients in the recipient list and displays all defined notifications and whether the notification is active.