User’s Manual BATTERY PACK (BPL48V75ART2U) CyberPower Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Phone: (952) 403-9500 Toll-free: (877) 297-6937 www.CPSww.
Content INTRODUCTION ........................................................................... 2 OVERVIEW ................................................................................... 2 UNPACKING .................................................................................. 2 FEATURES INCLUDE ....................................................................... 2 BASIC OPERATION ..................................................................... 3 SAFETY PRECAUTIONS .........................
Introduction Overview: The CyberPower external battery pack (BPL48V75ART2U) supports 75A polarized plugs, and is designed for variety of CyberPower UPS systems. When combining with the UPS, the battery pack provides extended runtime with a 48V DC external connection. Additional parallel-connected battery packs provides the UPS for a longer extended runtime operation.
Basic Operation Safety Precautions CAUTION! Before connecting the Battery Pack(s) to the UPS, completely turn off and unplug the main UPS from the wall receptacle. CAUTION! Do not disconnect the any Battery Packs when the UPS is turned on or plugged into a wall receptacle. CAUTION! Do not connect the battery pack into itself. Installation Guide The battery pack is supplied with rack mounting rails, mounting ears, and all the hardware. Follow the below steps to complete the installation. 1.
Tower Mounting with Battery Pack Installation of Two types of stands UPS models: PR3000LCDRTXL2U/PR3000ELCDRTXL2U with plastic stands 2 3 The vertical/tower installation procedures are stated below: 4 1. Stand the UPS and the battery pack. 2. Adjust the distance of stands to fix the UPS and the battery pack. 3. Insert the dust covers into the rack mount ear screw holes that are not being used. UPS models: PR5000LCDRTXL5U/ PR6000LCDRTXL5U/ PR5000ELCDRTXL5U/ PR6000ELCDRTXL5U with metal stands 2 1. 2.
Electrical Installation Guide CAUTION: It is necessary to put two plugs into the corresponding sockets to avoid the fire risk of over-current. Step 1: Connect the Battery Pack to the UPS. One Battery Pack Multiple Battery Packs Step 2: Connect the Battery Pack to wall power and connect the AC Input Inlet to the other battery pack’s AC Output Outlet. *For battery run time table information, visit www.CPSww.com or contact 877-297-6937. 5 Copyright © 2012 CyberPower Systems, Inc.
Trouble Shooting Problem Possible Cause Solution The UPS LCD does not perform expected runtime. Do not set the UPS to recognize the battery pack(s). By pressing the display toggle to select functions. Then, set up the correct battery pack numbers. The default setting is 0. Batteries charged. Allow the battery pack to charge for 24 hours. Do not expect full runtime during this initial charge period. Specified battery pack models can use AC to shorten charge time. The battery pack does not work.
Customer Service If the battery pack requests further service, please refer to the following information: 1. Call us at (877) 297-6937 or write to us at CyberPower Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379 or send us an e-mail message at saless@cpsww.com for instructions. 2. When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of Connected Equipment.
How Do You Get Service? 1. Call us at (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379 or send us an e-mail message at claims@cpsww.com for instructions. 2. When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of Connected Equipment. Have information on all applicable insurance or other resources of recovery/payment that are available to the Initial Customer and Request a Claim Number. 3.
capacity. What Are the Limitations? The sole and exclusive remedies of the Initial Customer are those provided by this Warranty. The Product was designed to eliminate disrupting and damaging effects of momentary (less than 1ms) voltage spikes or impulses from lightning or other power transients. If it can be shown that a voltage spike lasting longer than 1ms has occurred, the occurrence will be deemed outside the rated capabilities of the Product and the Limited Warranty is void.
Conformance Approvals FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. WARNING!! This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.