User`s manual

CyberPower Remote Management System
10
Remaining Runtime
How long the UPS can support its load under battery
mode.
System
Temperature The temperature inside the UPS.
[UPS->Information] Provide the technical specifications of the connecting UPS.
Information Description
Model Name The model name of the UPS.
Voltage Rating The output voltage rating (Volts) of the UPS.
Working Frequency The output frequency rating (Hz) of the UPS.
Power Rating The Volt-Amp rating of the UPS.
Current Rating The output current rating (Amps) of the UPS.
Load Power The power rating (Watts) of the UPS.
Battery Voltage Rating The DC voltage rating of the battery set.
Firmware Version The version number of the UPS firmware.
USB Version The version number of the UPS USB firmware
LCD Version The version number of the UPS LCD firmware
Battery Replacement Date
The date that the batteries were last replaced This
must be set manually and should be set after the
batteries have been replaced or when the unit is first
installed. If this date has not been set, it is
recommended that this date should be set
immediately.
Non-Critical Bank The amount of the Non-Critical Load.
External Batteries
The amount of the external battery packs connected
to the UPS.
Installation Place
When clicking the “Find it” button, either the alarm
will beep or the indicators will flash to inform users of
the location. This helps users to identify a specific
UPS in a multiple UPS installation.