User`s manual

CyberPower Remote Management System
18
[Logs->Event Logs] Display the list of events and a brief description of each event along with
the date and time stamp.
Note: 1. The recordable events are listed under “System->Notifications->Event Action.”
2. The recorded time is using the 24-hour clock format.
[Logs->Status Records] This page is used to view the logs of the UPS status and environment
status; however, different product may have different items displayed.
All items have the same definition as they are in the UPS status or environment status.
 Input min (V): The minimum input voltage of the utility power from the previous record.
 Input max (V): The maximum input voltage of the utility power from the previous record.
 Input (Hz): The current frequency of the utility power supplied to the UPS.
 Output (V): The output voltage of the UPS supplying to the connected equipment.
 Output (Hz): The output frequency of the UPS supplying to the connected equipment.
 Load (%): The percentage of the total UPS power load supplying to the connected
equipment.
 Capacity (%): The percentage of the current UPS battery capacity.
 Remaining Runtime: How long the UPS can support its load under battery mode.
 Temperature: The current temperature of the environment.
 Humidity: The current humidity of the environment.
[Logs->Graphing] This page is used to diagram the data of the Status Record. The graphing
function makes the status records easier to be analysed.
Item Definition
Graph Period
The period used to draw the graph backward from
today. The longer period selected, the more graphing
time is needed.
Graph Data
The data used to draw the graph. The more data
selected, the more graphing time is needed.
Graph Node
Select Display All Nodes in Detail will display all the
points along with the line; meanwhile, moving the
cursor on the point will show the information of that
point. If the box is not selected, the graph will show
the line only but less graphing time is needed.
Launch Graph in New
Window
Click the box will open a new page showing the graph
in detail.
[Logs->Maintenance] This page is used to maintain “Event Logs” and “Status Records”. The
application provides information on how many events have been recorded before it is full.
Item Definition