User`s manual

CyberPower Remote Management System
19
Event Logs
Clear All Clear the existing event logs.
The Number of Events
The number of existing event logs/the max number of
event logs.
Save Event Logs Save the existing event logs as a txt file.
Status Records
Recording Interval
Set the frequency to record the status data.
A smaller interval will provide more frequent
recordings but maintain them for a shorter period. A
larger interval will provide less frequent recordings,
but maintain them for a longer period.
Clear All Clear the existing status records.
Remaining Time
The remaining recordable time base on the recording
interval.
Save Status Records Save the status records as a txt file.
Note: Some old event logs/status records will be cleared automatically when there is no
space to record.
[System->General->User Account] This page is used to configure the login account.
Information Description
Administrator
The administrator can access full function, including
enable/disable the Viewer account.
Viewer
The viewer can access the read function but can not
control or change any settings.
Manager IP
This IP setting is to set the allowable IP addresses.
Users who log in as Admin (Viewer) can access
RMCARD web pages if its IP Address is in one of Admin
(Viewer) Manager IPs. If you want to access RMCARD
from any IP address, you can set one of them as 0.0.0.0
or 255.255.255.255.
Change Administrator account:
• Enter User Name
• Enter Current Password for Authentication
• Set the Manager IP (optional)
• Enter New Password
• Enter Confirm Password
• Click “Apply”