User`s manual

CyberPower Remote Management System
23
- Log: Record the event in the “Event Logs”.
- E-mail: Send an email to a specific user (An available SMTP server is necessary).
- Trap: A SNMP trap sent to a specific IP address.
- SMS: Send a short message to a specific mobile phone number (An available SMS
service provider is needed).
[System->Notifications->SMTP Server] After setting the proper SMTP server, the UPS can
send an email to users when a specific event occurs.
Item Definition
Server's IP/Host Name
The IP or Host Name of SMTP server used to notify
users by E-mail.
Sender's E-mail Address
The context of From field shown in the e-mail
message sent to user.
Authentication
Select this option if the SMTP server needs
Authentication check.
Username Username used for Authentication.
Password Password used for Authentication.
[System->Notifications->E-mail Recipients] Sets up to five e-mail recipients in designated
email address format. The Recipients will receive an e-mail notification when Events occur.
To add a new recipient, click New Recipient. To modify or delete an existing Recipient, click the
e-mail address of that recipient. To check if SMTP setting and the email recipients are set
correctly, click TEST button to check receiving status.
[System->Notifications->Trap Receivers] List of NMS IP as TRAP receiver, and the number of
receivers can be set up to 10. The receiver will receive a SNMP trap when an event occurs.
To add a new receiver, click New Receiver. To modify or delete an existing receiver, click the IP
address or name of that receiver. To check if the traps can be received correctly, click TEST
button.
[System->Notifications->SMS Service] Short Message Service (SMS) is a communication
service used by mobile communication systems. Using standardized communication protocols
will allow the interchange of short text messages between mobile devices. The system provides
4 methods to users to choose how they want to send the messages.
Information Description
Service provider is Clickatell
Select the Clickatell option in the SMS
Method field. Complete all the account
details including Username, Password
and HTTP API ID fields.