User`s manual

INTRODUCTION

Overview

The CyberPower Remote Management Card allows for remote monitoring and controlling of a

UPS attached to a network. After installing the hardware and configuring an IP address, the user

can access, monitor, and control the UPS from anywhere in the world! Simply use a web browser

such as Internet Explorer or Firefox to access your UPS. Servers and workstations can be

protected by the UPS utilizing the PowerPanel Business Edition Client version to gracefully

shutdown when signaled by the Remote Management Card.

Features

 Real time UPS monitoring

 Remote management and configuration of UPS via Web Browser or NMS

 Auto-shutdown to protect servers/workstations from data lost due to power failure

 Schedule shutdown/start-up/reboot of the UPS via remote control

 Event logging to trace UPS operational history

 Data logging for analyzing power conditions

 Event notification via email and SNMP traps

 Support Environment Sensor management(RMCARD203/303)

 Support TCP/IP, UDP, SNMP,HTTP, NTP, DNS, SMTP protocol

 Support SNMPv3, HTTPS protocol (HW V2.0 above)

 SNMP MIB provided

 Quick installation and user friendly interface

 User upgradeable firmware via FTP

 MD5 Security management provided

System Requirements

 A computer with a Windows or Linux Operating System (for optional PowerPanel Business

Edition Client)

 An Ethernet connection to an existing network

 NMS (Network Management Station) compliant with SNMP (for optional NMS management)