User`s manual

CyberPower Remote Management System
16
• Click “Apply”
Change Viewer account:
• Select “Allow Access” to enable the Viewer account
• Enter the User Name
• Set the Manager IP.(optional)
• Enter New Password
• Enter Confirm Password
• Click “Apply”
[System-> General->Date & Time]
Current Settings: Displays the current date and time on the card and allows users to set the date
and time. To set the date and time, users can choose to set manually or by using the NTP
(Network Time Protocol) server.
System Time Configuration
Using NTP server: Enter the IP address/domain name of NTP servers, choose the time
zone, and set the frequency to update the date and time from NTP server. Choose
"Update right now" to update immediately.
Manual Setup: Enter the date and time in the designated format.
[System-> General->Identification] Assigns the system’s name, contact, and location.
Items Definition
Name The name of the equipment.
Contact Where the power equipment is located.
Location The person to contact about this equipment.
[System-> General->Security] Sets for security setting.
Items Definition
Timeout
The period (in minutes) that the system waits before
auto logging off
Secret Phrase
The Authentication Phrase used to communicate with
PowerPanel Business Edition Client
[System->Notifications->Event Action] Displays the event actions for each event. Users can
click on the event to modify its action. When a specific event happens, the user can be notified by
the corresponding method according to this list.
- Log : Record the event in the “Event Logs”
- E-mail : Send an email to a specific user.(An available SMTP server is necessary)
- Trap: A SNMP trap sent to a specific IP address.