User`s manual
CyberPower Remote Management System
19
the Agent/Client sends a notification to
the SMS provider.
[System-> Notifications->SMS Recipients] Users can set up to 10 mobile phone numbers as
SMS recipients. The Recipients will receive a short message notification when events occur.
To add a new recipient, click New Recipient. To modify or delete an existing Recipient, click the
mobile number or Name of that recipient. To test SMS settings, click TEST button and see if the
test message is correctly received.
[System->Network Service->TCP/IP] Displays the current TCP/IP settings: IP address, Subnet
Mask, Gateway, DNS server. This also provides the function to obtain TCP/IP settings from the
DHCP server.
- DHCP: Select the “Enable DHCP” option and click Apply to get IP address, Subnet
Mask, and Gateway by DHCP. Select the “Obtain DNS Address from DHCP” option
and click Apply to get the IP of DNS from the DHCP.
- Manual : Enter the TCP/IP settings directly and click Apply.
[System-> Network Service->HTTP Service] Selects Enable to allow access to the HTTP
Service and configures the TCP/IP port of the Hypertext Transfer Protocol (HTTP) (80 by
default).
[System-> Network Service->SNMP Service] Allows users to select the NMS, defined by the
IP settings that can use the channel to control the system data access through SNMP.
Items Definition
Allow Access Set the SNMP service to either Enable or Disable
Community name
The name used to access this community by a
Network Management System(NMS)
The field must be 1 to 15 characters length.
IP
The IP address or IP address mask can be accessed
by NMS. A specific IP address allows access only by
the NMS with the specified IP Address. The 255 is
regarded as the mask and the rules list as follows:
‧192.168.20.255: Access only by an NMS on the
192.168.20 segment.
‧192.255.255.255: Access only by an NMS on the
192. segment.
‧0.0.0.0 (the default setting) or 255.255.255.255 :
Access by any NMS on any segment.
Access type
The allowable action for the NMS through the
community and IP.
Read only Gets at anytime but cannot SETS.
Write/Read
Gets at anytime, SETs anytime unless someone is
logged in the Web interface.