Installation Manual

2
Definitions for LED Indicators
Link LED color
Condition
Off
The Remote Management Card is not connected to
the Network/ or the Remote Management Card
power is off
On(Yellow)
The Remote Management Card is connected to the
Network
TX/RX LED color
Off
The Remote Management Card power is off
On(Green)
The Remote Management Card power is on
Flash
- Receiving/transmitting data packet
- Reset finished
Step 2. Configure the IP address for the CyberPower
Remote Management Card.
Method 1: Using the Power Device Network Utility Tool
1. Install the Power Device Network Utility tool available for download on the
Network Power Management product web page at www.CyberPower.com.