User Manual

CyberPower Remote Management System
20
Remaining Time
Displays the amount of time status records currently saved followed by
the maximum time that can be recorded based on the current
Recording Interval. Changing the Recording Interval will increase or
decrease the Remaining Time.
Save Status Records
Save the status records as a text file.
Note: Event Logs and Status Records use a First In First Out memory. Oldest data will be
rewritten once memory is full.
[System->General->Time] Current Settings: Displays the current date and time on the card status and
time until the next Network Time Protocol (NTP) update. To set the date and time, users can choose to
set it manually or by using the NTP (Network Time Protocol) server.
System Time Configuration:
Choose the Time Zone of your location in GMT (Greenwich Mean Time) first, and
• Using NTP server: Enter the IP address/domain name of NTP servers, and set the frequency to
update the date and time from NTP server. Click "Update right now" to update immediately.
• Manual Setup: Enter the date and time in the designated format.
[System->General->Identification] Assign the system’s name, contact, and location.
Item
Definition
Name
The name of the equipment.
Location
Where the power equipment is located.
Contact
The person to contact about this equipment.
[System->General->Daylight Saving Time] Adjust the clock daylight saving time.
Item
Definition
DST Configuration
Disable
Disable DST.
Tradition US DST
Set traditional US DST settings
Start: 2:00, second Sunday in March.
End: 2:00, first Sunday in November.
Manual DST
Manual DST date time rules.
[System->Security->Authentication] Set for login authentication and software authentication.
Item
Definition
Login Authentication
Local Account
Use local account Administrator or Viewer settings to log in.