User Manual

CyberPower Remote Management System
25
‧ 3DES (168 bits)
‧ DES (168 bits)
‧ RC4 SHA (128 bits)
‧ RC4 MD5 (128 bits)
Http Settings
Http Port
The TCP/IP port of the Hypertext Transfer Protocol (HTTP) (80 by
default)
Https Settings
Https Port
The TCP/IP port of the Hypertext Transfer Protocol Secure (HTTPS)
(443 by default)
Certificate Status
Click the following links:
‧ Valid Certificate (or Invalid Certificate): Certificate detail
information.
‧ Upload Certificate: Upload the certificate and replace the current
one.
Note: The format of uploading certificate must in a standard PEM
(Privacy Enhanced Mail).
[System->Network Service->Console Service] Select Enable to allow access to the Telnet or SSH
Service and configures the TCP/IP port that Telnet or SSH uses to communicate.
Item
Definition
Access
Allow Access
Enable the access to Telnet or SSH version 2,which transmits user
names, passwords and data in encrypted.
Telnet Settings
Telnet Port
The TCP/IP port (23 by default) that Telnet uses to communicate.
SSH Settings
SSH Port
The TCP/IP port (22 by default) that SSH uses to communicate.
Note: To enhance security, users can change port setting to any unused port from 5000 to 65535.
Users must then specify the non-default port to obtain access. Telnet clients require users
to append either a space and the port number or a colon and the port number to the
command line to access the control console.