User Manual

CyberPower Remote Management System
26
[System->Network Service->FTP Service] Allow users to Enable/Disable the FTP server service
and configure the TCP/IP port of the FTP server (21 by default).
Item
Definition
Allow Access
Enable the access to FTP server.
Service Port
The TCP/IP port of the FTP server (21 by default).
Note: The FTP server is used for upgrading Firmware. For more details about the upgrade
process, please refer to “Firmware Upgrade” section.
[System->Notifications->Event Action] Configure notification settings for every Device Event. Events
are categorized for ease of management.
• Log: Record the event in the “Event Logs”.
• E-mail: Send an email to a specific user (An available SMTP server is necessary).
• Trap: A SNMP trap sent to a specific IP address.
• SMS: Send a short message to a specific mobile phone number (An available SMS service
provider is needed).
[System->Notifications->SMTP Server] After setting the proper SMTP server, event notification email
can be sent to recipients when specific events occur.
Item
Definition
SMTP server address
The IP address or Host Name of the SMTP server used to send email
notifications.
Sender's E-mail Address
Email address used to send the email notification.
Authentication
Select this option if the SMTP server requires to authenticate the user.
Username
Username used for Authentication.
Password
Password used for Authentication.
Secure connection
Enable TLS or SSL security.
Service port
The port number used to communicate with the SMTP server.
[System->Notifications->E-mail Recipients] Set up to five email recipients to receive notifications
when configured Events occur.
To add a new recipient, click “New Recipient”. To modify or delete an existing Recipient, click the e-mail
address of that recipient. To check if SMTP setting and the email recipients are set correctly, click
“TEST” button to send a test message.