User Manual

CyberPower Remote Management System
1
Introduction
Overview
The CyberPower Remote Management Card allows for remote monitoring and management of a UPS
attached to a network. After installing the hardware and configuring an IP address, the user can access,
monitor, and control the UPS from anywhere in the world! Simply use a web browser or SSH client to
access your UPS. Servers and workstations can be protected by the UPS utilizing PowerPanel
®
Business Edition Client to gracefully shutdown when signaled by the Remote Management Card.
Features
 Real time UPS monitoring
 Remote management and configuration of the UPS via Web Browser, NMS or Command Line
Interface (SSH and Telnet)
 Local management and configuration of the UPS via serial connection
 Trigger servers/workstations to shutdown during a power event to prevent data loss or corruption
 Schedule shutdown/start-up/reboot of the UPS remotely
 Event logging to trace UPS operational history
 Graphic data logging to analyze power conditions
 Save and restore configuration settings
 Event notifications via Email, SNMP traps, Syslog, and SMS
 Support IPv4/v6, SNMPv1/v3, HTTP/HTTPs, DHCP, NTP, DNS, SMTP, SSH, Telnet, FTP, and
Syslog protocol
 Support Email Secure Authentication Protocols: SSL, TLS
 Support External Authentication Protocols: RADIUS, LDAP, LDAPS, Windows AD
 SNMP MIB available for free download
 User upgradeable firmware
 Upgrade firmware and upload configuration files to multiple units at once
 Multi-language user interface
 Quick installation
 Hot-swappable
 Cisco EnergyWise Compatible
 Support Environmental Sensor (ENVIROSENSOR)