User Manual

CyberPower Remote Management System
28
[System->Notifications->SMS Recipients] Users can set up to 10 mobile phone numbers as SMS
recipients. The Recipients will receive a short message notification when configured events occur.
To add a new recipient, click “New Recipient”. To modify or delete an existing Recipient, click the mobile
number or Name of that recipient. To test SMS settings, click “TEST” button and see if the test message
is correctly received.
[System->Reset/Reboot] Reset or reboot the RMCARD system.
Item
Definition
Reboot System
Restart the system without turning off and restarting the UPS.
Reset System
Reset the system to factory default setting. The system will restart.
This action will not turn off or restart the UPS.
Reset System (TCP/IP
Settings Reserved)
Reset the system to factory default setting but reserving TCP/IP. The
system will restart This action will not turn off or restart the UPS.
[System->About] Display system information for the Remote Management Card.
Item
Definition
Model Name
Model name of the Remote Management Card.
Hardware Version
The hardware version of the Remote Management Card.
Firmware Version
The version number of the current firmware installed on Remote
Management Card.
Firmware Updated Date
The last date the firmware was updated.
MAC Address
MAC address of the Remote Management Card.
Save Configuration
Click “Save” to save the configuration file. The text file will have a
default format of YYYY_MM_DD_HHMM.txt.
Restore Configuration
Use this function to restore a configuration that had been previously
saved. Click “Browse” to the location of the saved configuration file
and click “Submit”.